|
||
established 1992 Display Sign using florescent tubes converted to a single LED strip light |
 Existing lighted display sign using one 12 volt LED strip lighting |
 Ballast and two florescent tubes removed and installed a single 20 inch LED strip light |
 Information label for date of change over, power supply needed and for added protection in case wrong power supply plugged in a 5 ohms, 1 watt resistor |
 Two small brackets hold the LED light strip in place |
 12 volt dc adapter at 500 Mah is all that is needed for power |
 Close up on resistor in it's own holder |
 Underside look of a added in power on / off switch and power connector |
 Top Side look at power on / off switch and 12 volt power cord pluged into connector |
 Light box using two 40 watt florescent tubes |
 Converted using four 12 inch LED strips at 450 Mah. LED's are focus forward with about 20 degree angle, almost no light is reflected off the white rear interior housing as it was using florescent tubes. |
 Light box with front facing on using a standard 12 volt dc, positive centre adapter of 750 Mah |
Main Product Page |
Contact
Us Ordering Product Currency Converter |
  All
Prices in Canadian Currency |
 Custom Search
|