Wilson 841263 Digital Cellular Amplifier Kit

The SIGNALBOOST™ DB Pro cellular amplifier kit significantly improves the performance of any cellular device on any network (except Nextel) experiencing weak signal inside of buildings. Installation simplicity without sacrificing performance highlights this product. At the center of this kit is the DB Pro dual band amplifier with a new high gain design which comes with an external 75 ohm Wide Band Yagi Directional antenna. The inside panel antenna which rebroadcasts the amplified signal is designed for optional in-wall mounting. All components are interconnected using provided standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs.

Complete package - everything you need is in the box.
Wireless operation - no connection to cell phone or data card. Works in any inside location where improved cellular signal is needed. Power control logic ensures maximum output power is within cellular standards. Works wirelessly with multiple cell phones and data cards simultaneously. Works on all generations of CDMA, TDMA and GSM, FCC and IC type accepted.

Specifications:

Part Number 841263
Frequency 824-894 MHz / 1850-1990 MHz
Gain 62 dB / 62 dB
Max Output Power 2.5 Watts
Max RF 34 dBm / 15.7 dBm
Noise Figure 3.5 dB nominal
Flatness +/- 5dB
Isolation > 90 dB
Power Requirements 120-240 V AC, 50-60 Hz, 8 W
Connectors F - Female
Ohms 75
Dimensions 6.2 x 4.2 x 1.5 inch / 15.7 x 10.7 x 3.8 cm
Weight 0.64 lbs / 0.29 kg

Kit Contains:
Wilson SIGNALBOOST 841263 DB Pro Cellular
Signal Amplifier
Wide Band Yagi Antenna
Wall Mount Inside Panel Antenna
20’ White RG6 Coax
30’ White RG6 Coax
50’ White RG6 Coax

841263 #9276 $486.00

Installation Guild

859955 75 Ohm to 50 Ohm Converter

Converts 50 ohm cable used with 75 ohm amplifier systems when longer cable lengths are required using
low loss cable LMR-400.

Connectors F Type Female / N Female

#9348 $31.15


In-Building Wireless Dual-Band SIGNALBOOST™ DB PRO Amplifier Kit 841263
The Dual-Band Wireless Amplifier improves signals by 62 decibels in the Cellular (824-894 MHz) and PCS (1850-1990 MHz) band and works with Bell, Telus, Rogers, and other PCS carriers.
Use this product to deliver improved signal to Rogers Rocket Hub, Telus Smart Hub, Bell Turbo Hub Cable Talk Each antenna on a wireless amplifier system has a signal pattern. To achieve the greatest coverage area possible, each signal pattern should not reach the other antenna. This would cause the amplifier to oscillate (feedback) and reduce the performance of the amplifier. The antennas on a 50 dB amplifier must be separated by at least 40 feet. The antennas on a 60 dB amplifier must be separated by at least 75 feet. A roof or wall will help with separation.	The SIGNALBOOST™ DB Pro cellular amplifier kit significantly improves the performance of any cellular device on any network (except Nextel) experiencing weak signal inside of buildings. Installation simplicity without sacrificing performance highlights this product. At the center of this kit is the DB Pro dual band amplifier with a new high gain design which comes with an external 75 ohm Wide Band Yagi Directional antenna. The inside panel antenna which rebroadcasts the amplified signal is designed for optional in-wall mounting. All components are interconnected using provided standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs. Complete package - everything you need is in the box. Wireless operation - no connection to cell phone or data card. Works in any inside location where improved cellular signal is needed. Power control logic ensures maximum output power is within cellular standards. Works wirelessly with multiple cell phones and data cards simultaneously. Works on all generations of CDMA, TDMA and GSM, FCC and IC type accepted. Specifications: Part Number 841263 Frequency 824-894 MHz / 1850-1990 MHz Gain 62 dB / 62 dB Max Output Power 2.5 Watts Max RF 34 dBm / 15.7 dBm Noise Figure 3.5 dB nominal Flatness +/- 5dB Isolation > 90 dB Power Requirements 120-240 V AC, 50-60 Hz, 8 W Connectors F - Female Ohms 75 Dimensions 6.2 x 4.2 x 1.5 inch / 15.7 x 10.7 x 3.8 cm Weight 0.64 lbs / 0.29 kg Kit Contains: Wilson SIGNALBOOST 841263 DB Pro Cellular Signal Amplifier Wide Band Yagi Antenna Wall Mount Inside Panel Antenna 20’ White RG6 Coax 30’ White RG6 Coax 50’ White RG6 Coax 841263 #9276 $486.00 Installation Guild 859955 75 Ohm to 50 Ohm Converter Converts 50 ohm cable used with 75 ohm amplifier systems when longer cable lengths are required using low loss cable LMR-400. Connectors F Type Female / N Female #9348 $31.15