Wilson 841245 Digital Cellular Amplifier Kit

In-Building Wireless Dual-Band SOHO Cellular PCS Amplifier Repeater kit designed for small office and home office use. For 800 MHz Cellular and 1900 MHz PCS Bands. Works on all generations of CDMA, TDMA AND GSM. Overload indicator light, FCC and IC type accepted, Oscillation detection and gain reduction with auto reset intervals, 3-watt power amplifier.For increase signal strength in a large space or home (up to 5,000 square feet)

Greatly reduces disconnects and drop outs, significantly improves voice and data signal quality. Has up to 10 times more power than your cell phone or laptop data card, improves data communication rates needed for 3G technologies. Receives and transmits better than a cell phone or cellular data card, allows multiple cell phones and cellular data cards to
be used at the same time. Extends cell phone battery life.

Specifications

Kit Part Number 841245
Frequency 824-894 MHz / 1850-1990 MHz
Gain 50 dB / 50 dB
Max Output Power +30 dBm
Max RF + 30 dBm / + 10 dBm
Noise Figure 3 dB / 4 dB nominal
Isolation > 90 dB
Power Requirements 120 V AC / 3 A max
Connectors FME-Male 50 ohms
Dimensions 5.6 x 3.6 x 1.7 (inches) 14.2 x 9.1 x 4.4 (cm)
Weight 1.5 lbs / 0.7 kg

Kit Contains:

801245 Cellular Signal Amplifier
AC power-supply
301202 Dual Band Outdoor Antenna
301135 Indoor Panel Antenna
952330 30ft LMR cable
951104 20ft RG58 cable
971108 N female to FME male adapter
Installation Guide

841245 Kit #9291 $459.00

Installation Guild


In-Building Wireless Dual-Band SOHO Cellular / PCS Amplifier ( 841245 )
The Dual-Band SOHO Amplifier improves signals by 50 decibels in the Cellular (824-894 MHz) and PCS (1850-1990 MHz) band and works with Bell, Telus, Rogers and other PCS carriers.
Cable Talk Each antenna on a wireless amplifier system has a signal pattern. To achieve the greatest coverage area possible, each signal pattern should not reach the other antenna. This would cause the amplifier to oscillate (feedback) and reduce the performance of the amplifier. The antennas on a 50 dB amplifier must be separated by at least 40 feet. The antennas on a 60 dB amplifier must be separated by at least 75 feet. A roof or wall will help with separation.	In-Building Wireless Dual-Band SOHO Cellular PCS Amplifier Repeater kit designed for small office and home office use. For 800 MHz Cellular and 1900 MHz PCS Bands. Works on all generations of CDMA, TDMA AND GSM. Overload indicator light, FCC and IC type accepted, Oscillation detection and gain reduction with auto reset intervals, 3-watt power amplifier.For increase signal strength in a large space or home (up to 5,000 square feet) Greatly reduces disconnects and drop outs, significantly improves voice and data signal quality. Has up to 10 times more power than your cell phone or laptop data card, improves data communication rates needed for 3G technologies. Receives and transmits better than a cell phone or cellular data card, allows multiple cell phones and cellular data cards to be used at the same time. Extends cell phone battery life. Specifications Kit Part Number 841245 Frequency 824-894 MHz / 1850-1990 MHz Gain 50 dB / 50 dB Max Output Power +30 dBm Max RF + 30 dBm / + 10 dBm Noise Figure 3 dB / 4 dB nominal Isolation > 90 dB Power Requirements 120 V AC / 3 A max Connectors FME-Male 50 ohms Dimensions 5.6 x 3.6 x 1.7 (inches) 14.2 x 9.1 x 4.4 (cm) Weight 1.5 lbs / 0.7 kg Kit Contains: 801245 Cellular Signal Amplifier AC power-supply 301202 Dual Band Outdoor Antenna 301135 Indoor Panel Antenna 952330 30ft LMR cable 951104 20ft RG58 cable 971108 N female to FME male adapter Installation Guide 841245 Kit #9291 $459.00 Installation Guild