Wilson 801245 Digital Cellular Amplifier

• For 800 MHz Cellular and 1900 MHz PCS Bands.
• Works on all generations of CDMA, TDMA AND GSM.
• Automatic gain control to prevent oscillation.
• Automatic shutdown on overload.
• Maximum +30 dBm output power.
• Receiver sensitivity -110 dBm CDMA 1% FER.
• AC power supply included.
• FCC and IC type accepted.
• Patents Pending .
• Designed specifically for small office and home office
environments, apartments, high rises, condominiums,
   and dormitories.
• Greatly reduces disconnects and drop outs.
• Significantly improves voice and data signal quality.
• Has up to 10 times more power than your cell phone
or laptop data card
• Significantly improves voice and data signal quality
• Improves data communication rates needed for 3G technologies.
• Receives and transmits better than a cell phone or
  cellular data card.
• Allows multiple cell phones and cellular data cards to
  be used at the same time.
• Extends cell phone battery life.

Specifications

Part Number 801245
Frequency 824-894 MHz / 1850-1990 MHz
Gain 50 dB / 50 dB
Max Output Power +30 dBm
Max RF + 30 dBm / + 10 dBm
Noise Figure 3 dB / 4 dB nominal
Isolation > 90 dB
Power Requirements 120 V AC / 3 A max
Connectors FME-Male 50 ohms
Dimensions 5.6 x 3.6 x 1.7 (inches) 14.2 x 9.1 x 4.4 (cm)
Weight 1.5 lbs / 0.7 kg

801245 #9296 $376.00

Kit Contains:
Cellular Signal Amplifier
AC power-supply
Installation Guide

Installation Guild


In-Building Wireless Dual-Band SOHO Cellular / PCS Amplifier ( 801245 ) The Dual-Band SOHO Amplifier improves signals by 50 decibels in the Cellular (824-894 MHz) and PCS (1850-1990 MHz) band and works with Verizon, US Cellular, Cellular One, Alltel, Bell, Telus, Rogers, Cingular, T-Mobile and other PCS carriers.
Antenna and Accessory Options • 800 MHz Yagi Cellular Antenna ( 301111 ) • 1.9 PCS Yagi Cellular Antenna ( 301124 ) • Vertical Dome Antenna ( 301121 ) • Interior Dome Antenna ( 301123 ) • Trucker Mirror Mount Antenna ( 301101 ) • Coax Antenna Cable ( RG58 / LMR400 ) For All Cellular Antennas Cable Talk Each antenna on a wireless amplifier system has a signal pattern. To achieve the greatest coverage area possible, each signal pattern should not reach the other antenna. This would cause the amplifier to oscillate (feedback) and reduce the performance of the amplifier. The antennas on a 50 dB amplifier must be separated by at least 40 feet. The antennas on a 60 dB amplifier must be separated by at least 75 feet. A roof or wall will help with separation.	• For 800 MHz Cellular and 1900 MHz PCS Bands. • Works on all generations of CDMA, TDMA AND GSM. • Automatic gain control to prevent oscillation. • Automatic shutdown on overload. • Maximum +30 dBm output power. • Receiver sensitivity -110 dBm CDMA 1% FER. • AC power supply included. • FCC and IC type accepted. • Patents Pending . • Designed specifically for small office and home office environments, apartments, high rises, condominiums, and dormitories. • Greatly reduces disconnects and drop outs. • Significantly improves voice and data signal quality. • Has up to 10 times more power than your cell phone or laptop data card • Significantly improves voice and data signal quality • Improves data communication rates needed for 3G technologies. • Receives and transmits better than a cell phone or cellular data card. • Allows multiple cell phones and cellular data cards to be used at the same time. • Extends cell phone battery life. Specifications Part Number 801245 Frequency 824-894 MHz / 1850-1990 MHz Gain 50 dB / 50 dB Max Output Power +30 dBm Max RF + 30 dBm / + 10 dBm Noise Figure 3 dB / 4 dB nominal Isolation > 90 dB Power Requirements 120 V AC / 3 A max Connectors FME-Male 50 ohms Dimensions 5.6 x 3.6 x 1.7 (inches) 14.2 x 9.1 x 4.4 (cm) Weight 1.5 lbs / 0.7 kg 801245 #9296 $376.00 Kit Contains: Cellular Signal Amplifier AC power-supply Installation Guide Installation Guild