Wilson 801201 Digital Cellular Amplifier

• No physical connection to your cell phone or cellular data card
• Works with all generations of CDMA, TDMA, GSM and
   high-speed data technologies
• Passes TIA/EIA-98-E transmit tests for evaluating CDMA
  cellular phones
• Power control logic ensures maximum output power is within
  cellular standards
• Automatic gain control
• Automatic gain gain adjusting in the event of oscillation
  and or overload.
• Gain indicator lights
• Automatic shutdown on overload
• Allows multiple phones and cellular data cards to be
  used simultaneously
• Maximum 3 watts output power
• DC power-supply included - AC power supply sold separately
• Slim low profile inside antenna included ( 301127 )
• FCC and IC type accepted

Specifications

Part Number		801201
Frequency		824-894 MHz / 1850-1990 MHz
Gain		40 dB / 45 dB
Max Output Power		3 watts
Max RF		+35 dBm / +10 dBm
Noise Figure		3 dB nominal
Flatness		3 dB / 4 dB
Isolation		> 90 dB
Power Requirements		6 V, 3 A max
Connectors		FME-Male 50 ohms
Dimensions		4.5 x 3.5 x 1.25 (inches) or 11.43 x 8.9 x 3.2 (cm)
Weight		1.5 lbs / 0.7 kg

801201		# 9609 $ 349.00
801201		# 9818 $ 180.00 Demo Unit

Kit Contains:
Cellular Signal Amplifier
DC power-supply
Slim low profile inside antenna
Installation Guide

Installation Guild

AC/DC 12V Power Supply ( 859912 ) $34.00

For In-Building Wireless Smart Technology™ Amplifiers.
Converts 120V AC to 6 Volt DC.
Plugs into standard wall outlet
1.8 meter cable