RG58 and LMR400 Antenna Cables
|
|
Cable Talk
Each antenna on a wireless amplifier system
has a signal pattern. To achieve the greatest coverage area possible,
each signal pattern should not reach the other antenna. This would
cause the amplifier to oscillate (feedback) and reduce the performance
of the amplifier. The antennas on a 50 dB amplifier must be separated
by at least 40 feet. The antennas on a 60 dB amplifier must be
separated by at least 75 feet. A roof or wall will help with separation. Place
the inside antenna in the area where you need service the most. Keep
the inside antenna out of contact with metal objects and away from
electronic devices and electrical wiring. Some situations may require
more than one antenna. Remember to keep the minimum separation between
the inside and outside antenna. |
• Directional antenna
• Built-in ground plane
• Mounting hardware included
• For fixed installations |
| Specifications |
| Part Number |
301135 |
| Frequency Range |
800-960 MHz / 1710-2500 MHz |
| Gain |
7 dBi / 10 dBi |
| Beamwidth Horizontal Plane |
70 / 60 |
| Beamwidth Vertical Plane |
50 / 45 |
| Polarization |
Vertical |
| Impedance |
50 ohms |
| VSWR |
< 1.5 |
| Connector |
N Female |
| Dimensions |
8.27 x 7.09 x 1.73 inches / 21 x 18 x 4.39
cm |
| Weight |
1.32 lbs / 0.6 kg |
| #9771 |
$83.00 |
|
Installation Guide
|
|
|
established 1992
All
Prices in Canadian Currency