|
|||||||
Power Tester will display ATX
power voltages. For use with 24 pin plug and P4 / P6 / P8 plugs
  ATX Power Supply  LCD Display |
Aluminum
case Accurate
voltage indicator +/- 0.1V (+12V1/+5V/+3.3V/5VSB/+12V2/-12V) ATX
P.G. value display Lower
or higher P.G. values alarm ATX
output connectors check Lower
voltage detected alarm Over
voltage alarm No
voltage detected alarm Instructions Plug-in your ATX power 24 pin and plug-in (P4/P6/P8) into the tester. Turn on your ATX power supply LCD shows each voltage and P.G. value on the screen automatic and you can hear 2 beep sounds. ATX power output connector checking one by one. If power output is working, the LED will light on. If power output failed, the LED will not light on. Plug-in (HDD/Floppy) connector and check LED light (+12V1/+5V) Plug-in SATA connector and check LED light (+12V1/+5V+3.3V) Remove the connector after your checking Do not plug-in 2 connectors into the tester at the same time (Not include 24 pin connector) Abnormal voltage detected will not display on the screen. No voltage detect, “LL” will display on the screen. When detected Voltage is lower than Min. Value, “LL” will display on the screen. When detected Voltage is higher than Max. Value, “HH” will display on the screen. When detected voltage is lower than table value (A), will alarm. When detected voltage is higher than table value (B), will alarm. P.G. value detected lower 100ms or higher 900ms, P.G. value is abnormal and alarm. When abnormal happened, it will alarm and relative digit blink on the screen. #1374 $49.58 Sale $35.00 |
||
|
Each
Voltage normal range:
+5V,
+3.3V, +5VSB is ±5%; +12V1, +12V2, -12V is
±10%
Each Voltage normal range: +5V, +3.3V, +5VSB is ±5%; +12V1, +12V2, -12V is ±10% |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Currency Converter
Pricing
and availability can change after being posted on site - please contact
us for current prices